Yuki Super Glue Gel 20g
- Contents: 20 g
- viscous liquid: gel
- Application: plastic, rubber, metal, porous materials
- Delayed curing
Product data:
Physical properties (in liquid state):
- Chemical characterization: Ethyl cyanoacrylate monomer
- Flash point:> 81 ° C
Density: 1.05 g / cm³
- Viscosity (Brookfield) at +25 ° C: 80,000-120,000 mPa-s
Polymer properties:
- Color: clear / colorless
- softening point: 130 ° C
- Hardness (Rockwell): M58
- Final strength: 24 h
- Solubility: DMF, acetonitrile, acetone
Environmental conditions:
- Temperature range: -40 ° C to +85 ° C
curing:
- EPDM: <7 sec
- Neoprene: <5 s
- nitrile: <5 s
- balsa: <5 s
- ABS: 10-15 s
- Polycarbonate: 10-25 s
- Steel: 25-35 s
Tensile shear strength:
- Steel:> 15 N / mm²
- Aluminum:> 10 N / mm²
- nitrile:> 10 N / mm²
- Polycarbonate:> 6 N / mm²
- ABS: 6-10 N / mm²
Tensile strenght:
- EPDM:> 2.5 N / mm²
- Neoprene:> 5 N / mm²
- Nitrile:> 5 N / mm²
- Steel:> 18 N / mm²
Storage and shelf life:
Storage: The product should be protected from direct sunlight and heat.
The product becomes too strong. Before processing, the still unopened product should be brought to room temperature in order to optimize the adhesive force.
Shelf life: Ideal storage (dark and dry) of +10 ° C to +22 ° C, the shelf life is at least 12 months.
- Contents: 20 g
- viscous liquid: gel
- Application: plastic, rubber, metal, porous materials
- Delayed curing
Product data:
Physical properties (in liquid state):
- Chemical characterization: Ethyl cyanoacrylate monomer
- Flash point:> 81 ° C
Density: 1.05 g / cm³
- Viscosity (Brookfield) at +25 ° C: 80,000-120,000 mPa-s
Polymer properties:
- Color: clear / colorless
- softening point: 130 ° C
- Hardness (Rockwell): M58
- Final strength: 24 h
- Solubility: DMF, acetonitrile, acetone
Environmental conditions:
- Temperature range: -40 ° C to +85 ° C
curing:
- EPDM: <7 sec
- Neoprene: <5 s
- nitrile: <5 s
- balsa: <5 s
- ABS: 10-15 s
- Polycarbonate: 10-25 s
- Steel: 25-35 s
Tensile shear strength:
- Steel:> 15 N / mm²
- Aluminum:> 10 N / mm²
- nitrile:> 10 N / mm²
- Polycarbonate:> 6 N / mm²
- ABS: 6-10 N / mm²
Tensile strenght:
- EPDM:> 2.5 N / mm²
- Neoprene:> 5 N / mm²
- Nitrile:> 5 N / mm²
- Steel:> 18 N / mm²
Storage and shelf life:
Storage: The product should be protected from direct sunlight and heat.
The product becomes too strong. Before processing, the still unopened product should be brought to room temperature in order to optimize the adhesive force.
Shelf life: Ideal storage (dark and dry) of +10 ° C to +22 ° C, the shelf life is at least 12 months.
Υπάρχουσες Κριτικές: 0
