Product Description
6061-T6 aluminum CNC machining; most important feature of this product is suitable for TAROT sections of the 450 model upgrade, the new split main rotor holder TL48013 (the main paddle folder) slip nut mining with nut Limit hole, locking without using a wrench, easy-to-use. The main rotor holder split extension of the long arm (TL48014) wearing design, this design significantly reduces the cost. The new design specifications bearing clamp base will thrust bearing in the home, extended side swing arm bearing, reducing the virtual potential swing. Large size bearings can withstand more tension in order to adapt to the current mainstream models of large power . New M2.5 the stress ball head, the stepped threaded bring a better contact surface as well as to avoid the spiral pattern stress points. New split the main rotor holder TL48013 (main paddle folder) applies to all wide degree of 27MM 450DFC modified, comes with matching [450 DFC affine horizontal axis TL48009]. New Anti-shot horizontal axis overall tensile design 480 specifications. 12.9 M2.5 diameter screw pattern screw locking horizontal axis, this design can effectively reduce the shot paddle probability, effective thread depth of the horizontal axis bore 8MM , in order to avoid the impact of stress points. Main Rotor Housing New spindle lock design, effective to hold fast to the spindle to prevent the holder swing. Flybarless spindle holder to use ultra-low center of gravity design enables the main rotor level close to the center of gravity, this improvement can effectively enhance the roll, spin turn, the pendulum 3D action crisp sexual helicopter hovering state stability more high, while having a strong operating feel. The original models spindle can liter -class use. 450FBL Split Lock rotor head assembly, can be used Rod length 32.8MM 450FL new strengthening type pros and cons of the threaded rod TL2639 (optional) In the case of demolition ball head buckle, stepless adjustment rotor pitch .
Product specification
◆ metal lock new main rotor head group (one bit) x1 (TL45117)
◆ integrated horizontal axis washer x 2
◆ cup head SHCS (M2x9.5mm) x1
◆ cup head hex screws (M2x6.0mm) x3
◆ cup head hex screws (M2x8.0mm) x2
◆ Enhanced hexagonal nut (M2) x1
◆ the Radius rod x 2
◆ new rotor head brake bearing (1.5x4x2mm) x 4
◆ band edge bearing (2x5x6x2.3mm) x 4
◆ 450FL metal control arm x 2 (TL45113)
◆ Socket button head screw (0 # x 4mm) x 4 metal bearing Moderator rotor clamper × 2 (TL48013) bearing × 2
(Φ4.0xΦ9x3.0mm) the thrust bearing × 2
(Φ4.0xΦ9x4.0mm) Washers × 2
(Φ4xΦ6.5x0.5mm) bearing x 2
(Φ4.0xΦ9x4.0mm) Washers × 2
(Φ2.5xΦ4.5x0 .3 mm), 12.9 grade M2.5 * 15MM cup of head hexagonal screws × 2 Cup head hexagonal screw x 2
(M3 x 15MM) M3 slip nut x 2
450 DFC affine horizontal axis TL48009 (Φ4.0x54.0mm) x 1
450DFC main rotor holder fragile arm TL48014 2 12.9 the M2 * 5MM cup head hexagonal screws x 12.9 the M2 * 9MM cup head SHCS × 2
6061-T6 aluminum CNC machining; most important feature of this product is suitable for TAROT sections of the 450 model upgrade, the new split main rotor holder TL48013 (the main paddle folder) slip nut mining with nut Limit hole, locking without using a wrench, easy-to-use. The main rotor holder split extension of the long arm (TL48014) wearing design, this design significantly reduces the cost. The new design specifications bearing clamp base will thrust bearing in the home, extended side swing arm bearing, reducing the virtual potential swing. Large size bearings can withstand more tension in order to adapt to the current mainstream models of large power . New M2.5 the stress ball head, the stepped threaded bring a better contact surface as well as to avoid the spiral pattern stress points. New split the main rotor holder TL48013 (main paddle folder) applies to all wide degree of 27MM 450DFC modified, comes with matching [450 DFC affine horizontal axis TL48009]. New Anti-shot horizontal axis overall tensile design 480 specifications. 12.9 M2.5 diameter screw pattern screw locking horizontal axis, this design can effectively reduce the shot paddle probability, effective thread depth of the horizontal axis bore 8MM , in order to avoid the impact of stress points. Main Rotor Housing New spindle lock design, effective to hold fast to the spindle to prevent the holder swing. Flybarless spindle holder to use ultra-low center of gravity design enables the main rotor level close to the center of gravity, this improvement can effectively enhance the roll, spin turn, the pendulum 3D action crisp sexual helicopter hovering state stability more high, while having a strong operating feel. The original models spindle can liter -class use. 450FBL Split Lock rotor head assembly, can be used Rod length 32.8MM 450FL new strengthening type pros and cons of the threaded rod TL2639 (optional) In the case of demolition ball head buckle, stepless adjustment rotor pitch .
Product specification
◆ metal lock new main rotor head group (one bit) x1 (TL45117)
◆ integrated horizontal axis washer x 2
◆ cup head SHCS (M2x9.5mm) x1
◆ cup head hex screws (M2x6.0mm) x3
◆ cup head hex screws (M2x8.0mm) x2
◆ Enhanced hexagonal nut (M2) x1
◆ the Radius rod x 2
◆ new rotor head brake bearing (1.5x4x2mm) x 4
◆ band edge bearing (2x5x6x2.3mm) x 4
◆ 450FL metal control arm x 2 (TL45113)
◆ Socket button head screw (0 # x 4mm) x 4 metal bearing Moderator rotor clamper × 2 (TL48013) bearing × 2
(Φ4.0xΦ9x3.0mm) the thrust bearing × 2
(Φ4.0xΦ9x4.0mm) Washers × 2
(Φ4xΦ6.5x0.5mm) bearing x 2
(Φ4.0xΦ9x4.0mm) Washers × 2
(Φ2.5xΦ4.5x0 .3 mm), 12.9 grade M2.5 * 15MM cup of head hexagonal screws × 2 Cup head hexagonal screw x 2
(M3 x 15MM) M3 slip nut x 2
450 DFC affine horizontal axis TL48009 (Φ4.0x54.0mm) x 1
450DFC main rotor holder fragile arm TL48014 2 12.9 the M2 * 5MM cup head hexagonal screws x 12.9 the M2 * 9MM cup head SHCS × 2
Current Reviews: 0
