The new RAW 580 use the same module from Kraken 580.
-Incredible strong Power train enclosed in aluminum case,
-Ultra light 7075 aluminum alloy highly adjustable rotor head with super simple Tail group,
-Aluminum Boom 30 mm
-Easy maintenance
-Main blades up to 600mm.
TECHNICAL SPECITICATIONS
-AIRFRAME weight: 1740gr ( with S580 blades, no battery, no electronics )
-Main blade length: 550mm to 600mm
-Tail blade length: 95 to 105 mm
-Main rotor diameter: 1290 mm (with 580 mm blades included)
-Tail rotor diameter: 260 mm (with 95 mm tail blades included)
-Cyclic Servos: mini cyclic servo (torque over 8 Kg-cm). Kit includes servo mounts for mini-servos. Full size servo mounts available separately.
-Tail Servo: standard size 40mm.
-Main Rotor ratio : 11.5 to 8.6 :1 ( 22T included: 9.4:1)
-Tail Rotor ratio : 5.3-4.9:1 ( 23T included: 4.9:1 )
-Typical motor : 4025 series, 6S 1000-1200 Kv, 12S 500-600 Kv. Minimum motor shaft length is 26mm (We recommend using a 6mm diameter motor shaft)
-Typical speed controller: 6S 120-140 A, 12S 100-130A
-Battery size: 6S 5000/5800 mAh, 12S 2600/3200 mAh.
Helicopter Main Data
| Configuration | 580 |
|---|---|
| Available P/N | SG583 |
| Main rotor diameter | 1290mm with 580mm Main Blades |
| Main blade length | 580mm to 600mm |
| Tail rotor diameter | 260mm with 95mm Tail Blades |
| Tail blade length | 95mm to 105mm |
| Main shaft diameter | 10mm |
| Tail shaft diameter | 5mm |
| Weight |
1740gr ( with blades, no battery, no electronics ) |
| Cyclic Servos | Mini Size 36mm |
|---|---|
| Tail Servo | Standard size 40mm |
| Typical speed controller | 6S 120A, 12S 130A |
| Maximum motor size | 52 mm diameter x 58 mm height |
| Motor KV | 6S 1000-1400KV, 12s 500-700KV |
| Battery compartment | 6S 50x60x200 mm, 12S 50x45x280 mm |
| Battery capacity | 6S 5000/5500 mAh, 12S 2600/3300 mAh |
| Available ratios | From 8.5 to 12.9 |
Υπάρχουσες Κριτικές: 0
